**This rifle has sold. We have two more of these receiver sets and are currently sourcing parts for more of these. If you are interested in one like it, please reach out to firstname.lastname@example.org or subscribe to the waitlist.**
Being a custom shop, most of our work is done by request with customer provided components. Generally it has worked well and don’t normally build a “stock” rifle, but occasionally we like to put together a system that was thought out from the beginning, to our standards.
We aren’t much for tacti-cool names so you can name it after your high school sweetheart on your own, but this 14.5″ AR is still a very capable weapon.
Just like everything we do, care was taken at every point to make sure the rifle was done right, perfecting even the smallest details, and focusing primarily on how well it operates over anything else. Each component is individually inspected to our own set of quality control standards and we never make any assumptions that another vendor did or didn’t do something right.
Although a great looking rifle is always nice, its what’s inside is what really matters. Don’t feel bad putting this one through its paces in classes or harsh environments. It will do the job.
Lets get down to what its made of:
Mega Arms (2017 vintage) ambi billet receiver set provides for excellent consistency and fitment. The distinct color is from a nickel boron coating.
14.5″ Mid Centurion cold hammer forged barrel. Proof tested, Magnetic particle inspected, dimpled, and a conservative gas port that works well with quality ammo and is a dream while suppressed. We also went ahead and de-burred and mirror polished the feed ramps to improve feeding and decrease build up of brass and copper, an effect that comes from rounds scraping into the chamber.
Hodge Defense 11.5 Spine Lock (S-lok) rail strikes a fine balance between strength and weight providing necessary rigidity for rail mounted enablers that need to hold a zero.
Forward Controls Design GBF gas block is held to much tighter tolerances for an extremely efficient gas seal. Its installed with knurled tip set screws and red loctite, then pinned with a heavy duty coiled spring pin for extra measure.
Trajectory Arms nitride gas tube is held within .001″ tolerances and checked for alignment with the gas key on the bolt carrier.
Trajectory Arms BCG – You can read more about them here.
FCD 6315KM is pinned and welded, or you can supply your own if you have another mounting system with your suppressor. (Must meet 16″ minimum after pinning to meet ATF rifle standards)
Hodge Clover marked Radian LT charging handle
FCD LSFA Forward Assist
FCD ASF 90 degree Q selector (We can change this to the 50 degree after purchase by request.)
FCD PF-040 extended pivot and takedown pins
FCD ABC-R V3 Bolt catch
FCD EMR-A Ambi magazine release
Reptilia CQG grip
Centurion 2-stage sniper trigger
FCD TGF winter trigger guard
FCD CNF torqued to spec and staked to ensure it wont back off
Sionics QD end plate
VLTOR A5 buffer system with A5H2 and Sprinco Green action spring optimizes reliability and negates the need to swap buffers when adding a suppressor.
B5 Systems Bravo stock
Weight – 7Lbs, 4 oz
your choice of 3x Duramag black aluminum magazines or 2x PMAG M3 Window
If you have any questions about this build or want to add any changes (different stock, a muzzle device for your can, etc) please don’t hesitate to contact us using the email or phone links in the header and let us know. We can pin any muzzle device you like as long as it meets the minimum 16″ standard after pinning, but we must pin it before we can send it out to your FFL.
This purchase is required to be sent to an FFL in your state. Please provide your FFL details below to minimize processing time. If you want to pick the firearm up from us directly, put N/A in the forms. You are responsible for ensuring this rifle can be legally owned in your state. We cannot accept refunds on firearms.